Guitar Chords

How to Play the Gm Barre Chord (and Easier Alternatives)

Learn the full Gm barre chord at the 3rd fret, plus three easier ways to play Gm on guitar, with fingering tips for a clean, buzz-free sound.

On this page
  1. What Gm is
  2. The full barre, step by step
  3. Getting the barre to ring
  4. Easier ways to play Gm
  5. A practice path
  6. Common mistakes
  7. Safety

Play the full Gm barre by laying your index finger across all six strings at the 3rd fret, putting your ring finger on the 5th fret of the A string and your pinky on the 5th fret of the D string. Written low to high, the shape is 355333.

What Gm is

Gm has three notes: G, Bb and D. The Bb is the minor third, and it’s what makes the chord sound minor. In G minor, Gm is the i chord, the home chord.

The full barre, step by step

This is an E-minor-shape barre moved to the 3rd fret. If you already know Em, you know the pattern.

  1. Index finger: barre across all six strings at the 3rd fret. Roll the finger slightly onto its bony side edge, not the flat pad.
  2. Ring finger: 5th fret of the A string (the 5th string).
  3. Pinky: 5th fret of the D string (the 4th string).
  4. Strum: all six strings, from the low E down.

The index finger does most of the work. It fretts four strings (low E, G, B and high E), so it has to be clean across all of them.

Getting the barre to ring

  • Place the index just behind the fret wire. Pressing in the middle of the fret makes buzzing more likely.
  • Use arm weight instead of squeezing. Squeezing harder rarely fixes a buzz. Keep your thumb behind the neck, roughly opposite your middle finger, and gently pull back with your arm.
  • Check one string at a time. Pluck each string and listen. The G or B string under a finger crease is often the one that buzzes, so move the index a little if you need to.
  • Consider your setup. High action or a high nut slot makes any barre harder, and a setup can make barres easier. The guide to adjusting action on an electric guitar covers string height and the nut check.

Easier ways to play Gm

Three-string mini barre: xxx333

Barre the index finger across the G, B and high E strings at the 3rd fret, and mute the low E, A and D strings. This plays Bb, D and G, which are all three chord tones, so it’s a complete Gm.

Four-string version: xx0333

Add the open D string under the mini barre. The D in the bass makes this Gm/D, a Gm chord with D as the lowest note. It sounds fuller than the three-string version.

Capo 3 with an Em shape

Put a capo on the 3rd fret and play the open Em shape (022000). It sounds as Gm. Many players find it easier because the index finger doesn’t barre. If you’re new to the Em shape, the easiest open chords guide covers it.

A practice path

  1. Start with xxx333 until changes into and out of it are clean.
  2. Move to xx0333 or the capo 3 Em shape, depending on the song.
  3. Work toward the full barre in short sessions, a few minutes at a time.

For a drill, try changing between Gm and Cm, which is the iv chord in G minor, and then back to Gm. Changing into a barre is often the hard part, so the chord change drills guide covers how to move between shapes at a steady pace. Barre chords are one of the most common beginner hurdles; the hardest chord guide explains why.

Common mistakes

  • Squeezing harder. Position and arm weight matter more than pressure.
  • Assuming small hands can’t barre. Technique matters more than hand size.
  • Thinking xxx333 isn’t really Gm. It includes all three chord tones.
  • Pressing the index only where it’s needed. The index only needs enough pressure on the strings it frets.

Safety

If you feel sharp pain or numbness in your hand or wrist, stop. Short practice sessions help avoid strain. For causes and warning signs, see left hand pain from guitar.

The complete guide to guitar chords

Slash Chords on Guitar: How to Read and Play D/A, A/E, F/G and More
Read the guide

Keep exploring

Guides from other topics

All topics →