A playable acoustic under $100 is possible
A playable acoustic guitar under $100 is possible, but set your expectations realistically. At this price you will usually get a laminate body, basic hardware and factory strings that are often poor. A good setup can make a big difference. Prices change often, so check current listings before you buy.
What $100 usually buys
Almost every acoustic under $100 has laminate, or plywood, construction for the top, back and sides. Solid-top guitars usually start higher, often around $150 to $250, though prices vary.
Laminate tops are more stable against changes in humidity and temperature than solid wood, which makes them a sensible choice for a beginner. The trade-off is a less rich tone, and the sound is unlikely to improve much with age.
Starter bundles
Many budget guitars are sold as starter packs. They often include a gig bag, a tuner, picks, a strap, a capo and extra strings. The accessories are usually basic, so treat them as a bonus rather than the reason to buy.
One hands-on review of a roughly $100 starter set found the sound good for the price, but the strings were harder to press down than on nicer guitars. That pattern is common at this price, so plan on a setup and new strings.
What to check before you buy
- Action at the 12th fret. As a rough guide, about 2.5 mm (6/64 in) at the low E and 1.6 to 2 mm (4 to 5/64 in) at the high E is playable. Measure the gap between the bottom of the string and the top of the 12th fret.
- Adjustable truss rod. A few very cheap guitars lack one, which makes fixing a neck problem harder.
- Fret ends. Sharp fret ends, sometimes called fret sprout, are more common on guitars kept in dry climates. Run a finger along the edges of the frets.
- Tuning stability. Cheap tuners can slip. Replacement tuners often cost about $20 to $40.
- Return policy. Quality control varies from one unit to another at this price, so buy from a seller with easy returns.
Setup and strings
High action is one of the most common reasons a cheap guitar feels hard to play. It is often a setup issue rather than a defect. A professional setup often costs roughly $50 to $100, though prices vary by shop.
Factory strings on cheap guitars are often poor. A new set usually costs about $5 to $15, and it is one of the cheapest ways to improve how a guitar sounds and plays.
Many guitars under $100 are playable once they have new strings and a setup.
Brands to look at
No single brand is best for everyone. Yamaha, Fender (including Squier) and Ibanez show up often in budget and starter lines. Budget brands such as Rogue and Donner are also mentioned often at this price. Models and prices change, so check current listings before you buy.
Step-ups just above $100
If you can stretch the budget, step-up models often offer better build quality and a more consistent tone. Examples include the Yamaha FG800 and FS800 and the Fender CD-60S. These usually cost more than $100, so check current prices.
Used guitars as an alternative
A used guitar from Yamaha, Fender or Ibanez often beats a new guitar at $100 for build quality and playability. The used guitar checklist covers what to look for before you pay.
Common myths
- “Every guitar under $100 is unplayable.” Many are fine after a setup and new strings.
- “Solid-top guitars are common at this price.” They are rare, so verify any solid-top claim.
- “High action means a defective guitar.” It is often a simple setup issue.
- “Toy-store guitars and budget guitars are the same thing.” They are not. Budget guitars from known brands can be playable.
Conclusion
A guitar under $100 can be a fine first acoustic, as long as you expect a laminate body and budget for strings and a setup. Check the action, truss rod and fret ends, and buy from a seller with easy returns. If you can stretch your budget, a used guitar or a step-up model may be worth the extra money.
Before you buy, confirm the size fits you using the guitar size guide. If you are weighing a larger body, the concert vs dreadnought comparison covers the difference.