Standard, whole step down and drop C at a glance
| Tuning | Strings, low to high | What changes |
|---|---|---|
| Standard | E A D G | Starting point |
| Whole step down (D standard) | D G C F | Every string down two semitones |
| Drop C | C G C F | Whole step down, plus the low string down another whole step |
What whole step down is
A whole step is two semitones, which is the same distance as two frets. Whole step down lowers every string by two semitones, so E A D G becomes D G C F.
Your standard shapes still work. Everything simply sounds two semitones lower, so a shape you know as an E-shape now sounds as a D-shape. To sound a note that sits at a given fret in standard tuning, fret two frets higher.
Players use whole step down for a heavier, darker low end and to match lower vocal ranges. It shows up often in hard rock and metal.
How to tune to whole step down
Lower each string by two semitones, one at a time: low E to D, A to G, D to C, and G to F. Use a tuner on every string. Loosen gradually rather than dropping a string in one go, and keep the change in tension in mind (see the section on tension and setup below).
What drop C changes
Drop C starts from whole step down and lowers the low string another whole step, to C. The four strings become C G C F.
The low string and the next string are now a perfect fifth apart (C to G). The other two intervals stay as fourths. Drop C is common in metal, hard rock, metalcore and nu-metal.
Drop C is not the same as C standard, which is C F B♭ E♭.
Drop C low-string notes
On the low string in drop C, the frets give these notes:
0 C, 1 C♯, 2 D, 3 E♭, 4 E, 5 F, 6 F♯, 7 G, 8 A♭, 9 A, 10 B♭, 11 B, 12 C.
Compared with whole step down, a note on the drop C low string sits two frets higher. Compared with standard, it sits four frets higher. Higher up the neck, drop C patterns often call for hand shifts. For the hand span used in lower positions, see what the 3 fret rule means on bass.
Drop C scales
These are the notes in three common scales in drop C. The root sits at fret 0 on the low string.
- C major: C D E F G A B. It is the scale with no sharps or flats.
- C natural minor: C D E♭ F G A♭ B♭.
- C minor pentatonic: C E♭ F G B♭.
Tension and setup
Lower tuning means less string tension, and the effect is bigger than it looks. Tension depends on pitch, so as the pitch falls the tension drops faster. Whole step down cuts tension by about a fifth. Dropping the low E to C cuts that string’s tension by about 37 percent.
What that means in practice:
- Floppy strings buzz and intonate poorly. Heavier gauges restore tension and clarity. A tuning change may call for a new set of strings.
- Check neck relief. Lower tension can reduce relief and cause buzz. Adjust the truss rod only in small increments, and check after each one. If you’re not sure, have a technician do it.
- Check intonation and the nut slots after a big tuning change.
Common mistakes
- Drop C is not C standard. Standard C is C F B♭ E♭, a different tuning.
- Whole step down is not drop D. Drop D (D A D G) lowers only the low string, by a whole step. It is a separate tuning, and some bassists do use it.
- Drop C patterns aren’t the same as standard. Any pattern that uses the low string shifts by fret count. Use the chart above.
- Tab fret numbers don’t show pitch. Always check the tuning written with the tab.
Five-string basses in standard tuning
A five-string bass in standard tuning already reaches below C, down to a low B. Some five-string players stay in standard tuning and use the extra string for range instead of retuning. For a comparison of the two, see 4-string vs 5-string.