Guitar Styles

Metalcore Guitar Techniques: Riffs, Breakdowns and Tunings

Learn metalcore guitar techniques: low drop tunings, chugs, gallop rhythms, breakdowns, pinch harmonics, tremolo picking and practice tips for tight riffs.

On this page
  1. Tune down, and choose the right strings
  2. Palm-muted chugs
  3. Gallop rhythms
  4. Breakdowns: syncopation and rests
  5. Open-string pedal-point riffs
  6. Dissonance: minor 2nds and tritones
  7. Melodic harmonies
  8. Pinch harmonics
  9. Tremolo and alternate picking
  10. Clean and melodic sections
  11. Practice with a metronome
  12. Common misconceptions
  13. Bands to study
  14. Safety
  15. Where to go next

Metalcore guitar combines low tunings, tight palm-muted chugs, breakdowns and melodic harmonies. Most of the heaviness comes from precise muting and rhythm, not from speed. Tune down with the right strings, practice your chugs slowly with a metronome, and treat the syncopation as seriously as the notes.

Tune down, and choose the right strings

Metalcore often uses drop tunings. Common options include:

  • Drop D: D A D G B E
  • Drop C: C G C F A D
  • Drop B: B F# B E G# C#
  • Drop A: used on seven-string or baritone guitars

Exact tunings vary by band. Lower tuning does not automatically sound heavier. If the strings are too loose for the tuning, the riffs sound flabby, so match the gauge to the tuning. Roughly 10 to 52 is common for Drop D, and 11 to 56 or 12 to 60 is typical for Drop C and Drop B. The right gauge depends on your scale length and preference. Guitar string types explains how gauges are labeled.

Longer scales help low tunings. A standard Fender-style guitar has a 25.5-inch scale. Baritone guitars often use 26.5 to 28 inches or more.

Palm-muted chugs

A chug is a palm-muted open low string, picked tightly in time. It is the core sound of metalcore riffs. Rest the picking-hand edge lightly on the strings near the bridge saddles. If your hand sits too far from the bridge, the pitch goes dead. If it sits too far onto the saddles, the strings ring open. How to palm mute on guitar covers pressure and placement.

Keep the chugs even. Each pick stroke should sound the same volume as the last, and the rhythm should lock to the kick drum.

Gallop rhythms

A gallop is an eighth note followed by two sixteenth notes, repeated. It is a classic metal rhythm for fast chugs. Practice the gallop slowly, count the sixteenths, and speed up only when every stroke is even.

Breakdowns: syncopation and rests

A breakdown is a slower or half-time section, often with syncopated chugs locked to the kick drum. Rests are part of the riff. A short silence before a hit gives the next chug more impact.

Breakdowns are not just slow. Precise syncopation and clean muting matter more than tempo. A breakdown with sloppy timing sounds weaker than a fast one played tightly.

Open-string pedal-point riffs

A pedal-point riff alternates an open low string with fretted notes higher on the neck. The open string acts as a constant anchor, and the fretted notes move above it. The contrast between the two creates tension, which many metalcore riffs use.

Dissonance: minor 2nds and tritones

Dissonant chords use minor seconds and tritones played over an open low string. These intervals sound harsh on their own, which is the point. Use them sparingly so that they keep their impact.

Melodic harmonies

Many metalcore bands add melodic harmonies, usually two guitars playing in thirds or sixths. This style owes a lot to Swedish melodic death metal. Practice the two parts separately first, then play them together and listen for clean intonation.

Pinch harmonics

A pinch harmonic is made when the thumb edge brushes the string just after the pick strikes it. It produces a high, squealing note. Use it on a single note or a short accent, not on every chord, so that it keeps its effect.

Tremolo and alternate picking

Metalcore often uses tremolo picking, which rapidly repeats one note with the pick. Fast passages usually need strict alternate picking, where downstrokes and upstrokes alternate evenly. Build speed slowly with a metronome, and keep your picking motion small and relaxed.

Clean and melodic sections

Metalcore is not only breakdowns. Many songs contrast heavy sections with clean, melodic parts. Practice clean picking and clear chord voicings alongside the heavy material, so that the contrast works in your playing.

Practice with a metronome

Build your chugs and gallops slowly, then raise the tempo in small steps. A good routine is to play a riff at a tempo where every note is clean, record it, and move up only when the recording sounds even.

Common misconceptions

  • Lower tuning does not automatically mean heavier. Loose strings sound flabby.
  • Breakdowns are not just slow. Syncopation and muting matter most.
  • Palm muting has a sweet spot. Too far from the bridge kills the pitch, and too far onto the saddles leaves the strings unmuted.
  • Metalcore is not only breakdowns. Clean, melodic sections are part of the style.

Bands to study

Listen to Killswitch Engage, August Burns Red, Parkway Drive, Architects, As I Lay Dying and early Bring Me the Horizon. Pay attention to how each band places its breakdowns, harmonies and clean sections.

Safety

Metalcore is loud. Use hearing protection at practice and at gigs, especially with high-gain amps.

Where to go next

For the gear behind a tight metalcore tone, see how to get metalcore guitar sound. For the power chords behind many riffs, see how to play power chords on guitar. For timing drills that help with chugs, see how to learn rhythm guitar.

The complete guide to guitar styles

How to Learn Rhythm Guitar
Read the guide

Keep exploring

Guides from other topics

All topics →