Guitar Setup

Guitar String Types: Ball End Strings and Classical String Tension

Guide to guitar string types: electric and acoustic gauges, magnetic wraps, ball end and tie end attachments, and classical tension from normal to extra high.

On this page
  1. Electric and steel acoustic sets
  2. Ball end, loop end and tie end
  3. Classical strings: tension, not gauge
  4. How to choose
  5. Common misconceptions

Guitar strings differ in four ways: the metal they are made from, their gauge (thickness), how the end attaches to the guitar, and their tension. Choosing the right type for your guitar matters before you compare brands. Electric strings are usually nickel or steel, acoustic strings are usually bronze alloys, and classical strings are usually nylon.

Electric and steel acoustic sets

Steel-string sets are sold by gauge, which is the thickness of the high E string up to the low E. Common electric sets are 9 to 42 and 10 to 46. Common acoustic sets are 12 to 53 (light) and 13 to 56 (medium).

Gauge names such as light and medium are not standardized, so one brand’s “light” may not match another’s. Compare the actual numbers.

Electric strings need a magnetic metal to work with the pickups. Look for nickel-plated steel, pure nickel or stainless steel. Bronze acoustic strings do not work well with magnetic pickups, so an acoustic set is not a good choice for an electric.

Acoustic strings come in two common wraps:

  • 80/20 bronze is brighter.
  • Phosphor bronze is usually described as warmer.

Coated strings, such as Elixir, last noticeably longer than uncoated sets. Makers’ claims about how much longer vary, so treat them as a rough guide.

Ball end, loop end and tie end

Strings attach to the guitar in different ways:

  • Ball end: a small ball on the string’s end anchors it. Steel-string acoustics hold the ball with the bridge pin. Electrics anchor it at the bridge, the tailpiece, or through-body ferrules.
  • Loop end: used on banjos and some mandolins.
  • Tie end: used on traditional classical strings. The string has no ball and is knotted through the tie-block bridge.

Ball-end nylon sets exist for some nylon-string guitars, and they are easier to install than tie-end sets. Check that a set matches your guitar’s bridge type before you buy it.

Classical strings: tension, not gauge

Classical sets are rated by tension rather than gauge. The usual ratings, from lowest to highest, are low (or light), normal, high (or hard), and extra high (or extra hard). The names and actual values vary by brand, so compare the per-string tension figures in the maker’s data when you can.

As a rough guide, a normal-tension classical set pulls about 85 pounds (about 38 kg) in total. A light steel acoustic set pulls about 160 pounds (about 73 kg). Extra-hard classical sets pull more than normal sets. These figures are approximate, so check the maker’s numbers before you rely on them.

Normal vs extra high tension

  • Low tension is easier on the fingers and gives a warmer sound. It can buzz more and sounds quieter.
  • Normal tension is a common balance for most players.
  • Extra high tension is louder, with more projection and punch and less buzz. It is harder to press down and to bend.

Extra high tension is still low tension compared with steel. It doesn’t mean steel-string tension.

Never put steel strings on a classical guitar. The much higher tension can damage the bridge and neck. For choosing between the two kinds of guitar, see steel string vs nylon string guitars. Higher-tension classical sets can also stress lightly built or vintage classical guitars, so check the maker’s recommendation before you move up.

Classical treble and bass strings

Classical trebles come in several materials: clear nylon, rectified nylon, fluorocarbon (thinner and brighter), or composite. Classical basses are usually silver-plated copper wound over a multifilament nylon core.

How to choose

  • Electric: choose a magnetic wrap and a gauge that suits your neck and tuning. Drop tunings often need a heavier gauge. See alternate guitar tunings. The metalcore techniques guide lists common gauges for drop tunings.
  • Steel acoustic: choose bronze or phosphor bronze and a gauge that suits your guitar. Lighter sets lower the tension and can make buzz more likely if the setup is tight. See why your high E is buzzing.
  • Classical: start with normal tension. Move to a higher rating if you want more projection and can manage the extra fret pressure.

When you’re ready to fit new strings, see how to change guitar strings.

Common misconceptions

  • “Extra high tension” means steel-string tension. It doesn’t. It is still low tension.
  • Gauge names are standard. They aren’t. Compare the numbers.
  • Any string will work with any bridge. Ball-end and tie-end sets are made for different bridge types, so check before you buy.

Safety: Cut string ends are sharp and can whip when they break, so wear eye protection when you cut or tension strings. Check the maker’s recommendation before using high-tension sets on lightly built or vintage classical guitars.

The complete guide to guitar setup

How to Adjust Action on an Electric Guitar
Read the guide

Keep exploring

Guides from other topics

All topics →

How to Learn Rhythm Guitar

Learn rhythm guitar step by step: keeping time with a metronome, clean chord changes, strum patterns, muting and practice routines that build solid timing.

Guitar Styles 5 min read