The correct way to tune a guitar is to match each open string to its target note, from low to high: E, A, D, G, B, E. Use a tuner, turn each tuning peg until the tuner reads the right note in tune, and finish each string by tuning up to pitch. Then make a second pass, because tuning one string changes the tension on the others.
The target notes
A common way to remember the order from low to high is “Eddie Ate Dynamite, Good Bye Eddie.” The target pitches below assume A4 is tuned to 440 Hz.
| String | Note | Frequency |
|---|---|---|
| 6th (thickest) | E2 | 82.41 Hz |
| 5th | A2 | 110.00 Hz |
| 4th | D3 | 146.83 Hz |
| 3rd | G3 | 196.00 Hz |
| 2nd | B3 | 246.94 Hz |
| 1st (thinnest) | E4 | 329.63 Hz |
Tune with a tuner
- Set the tuner to A = 440 Hz, unless the band or recording uses a different reference.
- Pluck the low E at normal strength. Read the tuner after the first instant of the attack, because that first instant can read slightly sharp.
- Turn the peg slowly. Watch the string as you turn: tightening raises the pitch and loosening lowers it. The direction depends on the headstock layout, so check which way the string tightens.
- If the string ends up sharp, loosen it past the target note and then tune up to it. Tuning up takes out the slack in the gears and keeps the string from slipping.
- Repeat for the A, D, G, B and high E strings.
- Make a second pass. Tuning one string changes the tension on the others, especially on guitars with floating tremolos.
Tune with the guitar in playing position. A guitar lying flat or on a stand can read slightly differently. Within about 2 to 3 cents is fine for most playing. A strobe tuner can read to about 0.1 cent if you want more precision.
Choose a tuner
- Clip-on tuners read the vibration of the headstock. They are the simplest option for most players.
- Pedal or plug-in tuners are the easiest choice for an electric guitar.
- Phone apps use the phone’s microphone. They work for basics but struggle in noisy rooms.
Tune without a tuner
Once one string is in tune, you can tune the rest by matching frets across the strings:
- The low E at the 5th fret matches the open A string.
- The A string at the 5th fret matches the open D string.
- The D string at the 5th fret matches the open G string.
- The G string at the 4th fret matches the open B string.
- The B string at the 5th fret matches the open high E string.
This method gets the strings in tune with each other, not with concert pitch. Start from a reference tone, such as a tuner or an app, to set the low E. For more on how the strings relate, see how to learn the guitar fretboard.
Why it can still sound wrong
- The guitar is in tune when open but sounds off when you fret chords higher up the neck. That points to intonation, not tuning. See how to intonate a guitar with a tuner.
- Pressing hard or squeezing the neck pulls notes sharp. Press just behind the fret with a firm but light touch. How to hold a guitar with your left hand covers thumb and finger position.
- New strings keep going flat. New strings stretch, so stretch them and retune several times. See how to change guitar strings.
- The guitar drifts after you move it. Temperature changes affect the strings. Let the guitar settle before you tune. For more causes, see why your guitar keeps going out of tune.
Safety: Don’t crank strings far above pitch. They can snap at the tuner or the saddle, and the cut ends are sharp.