Guitar Tone

Why is my guitar making a high pitched noise?

A high-pitched noise is usually feedback, electrical whine, or a microphonic pickup. Here's how to tell which one you have and how to fix it.

On this page
  1. Feedback: the most common cause
  2. Microphonic pickups and preamp tubes
  3. Electrical whine and interference
  4. Strings, hardware, and harmonics
  5. A buzz when the tone knob is up
  6. When it might not be the guitar
  7. Safety
  8. Common misconceptions

A high-pitched noise from a guitar is usually one of three things. It can be feedback, a squeal that happens when volume and gain are high and you’re close to the amp. It can be electrical whine or buzz from interference. Or it can be a microphonic pickup or preamp tube that rings when it’s knocked.

A quick test: turn the volume down and step away from the amp. If the noise stops or changes, feedback is the likely cause. If it stays the same wherever you stand, look at the electronics or the pickups.

Feedback: the most common cause

Feedback is worst at high gain and high volume, especially when you face the amp and the strings vibrate in response to the sound from the speaker. The quick fixes are simple:

  • Turn away from the amp, or step back.
  • Lower the gain, or the guitar’s volume.
  • Mute the idle strings with your fretting hand or your picking hand. How to mute individual strings shows how.

Hollow and semi-hollow guitars feed back more than solid bodies. What is an archtop electric guitar explains the hollow and semi-hollow types. Acoustic-electric guitars can benefit from a soundhole cover. Some acoustic-electric preamps include a notch filter or phase switch that tames feedback.

Microphonic pickups and preamp tubes

Some squeals happen even when you’re nowhere near the amp. Loose windings, unpotted coils, or loose pickup covers can make a pickup microphonic. To check, tap the pickup with the amp on. A loud, ringing tap points to a microphonic pickup. The usual fixes are wax potting or a replacement pickup, which a guitar tech can do.

In a tube amp, a microphonic preamp tube, often V1, can ring when the amp is tapped. Replacing that tube usually fixes it.

Don’t open a tube amp to fix this yourself. Its capacitors can hold a lethal charge even when it’s unplugged. Take it to a qualified tech.

Electrical whine and interference

A whine or buzz that changes with the room or your position is often interference. Common sources include a computer’s USB ground loop, laptop chargers, digital pedals on shared power, wireless systems, and LED bulbs or dimmer switches.

To test, run the laptop on battery, try isolated pedal power, and move away from lights and screens. If the noise drops, you’ve found the source.

Shielding helps with interference hum and buzz, but it doesn’t stop microphonic squeal. Expensive cables don’t usually stop whine either. Power and grounding are the more common causes.

Strings, hardware, and harmonics

  • Unplugged ringing. String lengths behind the nut or bridge, or tremolo springs, can ring on their own. Damp them with foam, a cloth, or a fret wrap.
  • Loose hardware. Loose tuner nuts or pickup screws can ring sympathetically.
  • Pinch harmonics. A squeal from a pinch harmonic is often accidental, when your thumb grazes a string while you pick hard with high gain. Metalcore guitar techniques covers playing them on purpose.

A buzz when the tone knob is up

Many beginner guitars use single-coil pickups, which pick up interference easily. Turning the tone knob up brightens the sound, but it also lets more hiss and hum through. Rolling it back a little reduces the noise. Better long-term options include noiseless pickups, a shielded control cavity, a noise gate, and a clean power source.

When it might not be the guitar

If you still hear a high tone with the guitar and amp switched off, the sound may be tinnitus rather than the instrument. A doctor or audiologist can check it.

Safety

Sudden loud feedback can damage your hearing. Turn the amp down before you start troubleshooting, and wear earplugs when you test at volume.

Common misconceptions

  • A squeal means the guitar is broken. It’s usually the position or the gain.
  • A noise gate stops feedback. It doesn’t stop feedback while you’re playing. How a noise gate works explains what it can and can’t do.
  • Shielding fixes a squeal. It reduces interference hum and buzz, not microphonic squeal.
  • Expensive cables stop whine. Whine usually comes from power or grounding.

For gain and volume settings that keep a high-gain tone clean, see how to set your guitar tone. If you hear whine on a recording, how to record clean guitar covers the signal path.

The complete guide to guitar tone

How to Dial In Lead Guitar Tone
Read the guide

Keep exploring

Guides from other topics

All topics →

How to Learn Rhythm Guitar

Learn rhythm guitar step by step: keeping time with a metronome, clean chord changes, strum patterns, muting and practice routines that build solid timing.

Guitar Styles 5 min read